Doodles Cafe - Inkjet Printable Iron-On Transfer Paper for Black and Dark Textiles - A3, 10pk - Without Gridlines

Printing Instruction:

Set the printer on optimal print quality-photo print quality.

Transfer Instruction with use of a domestic iron:

• Cut out the image around the edges without leaving a margin. Remove the image from the backing paper slowly.
• Put the image on the garment and place the grease proof paper over.
• Prepare a stable, heat-resistant surface suitable for ironing.
• Preheat the household iron to the cotton setting (204 C/400 F). Briefly iron the fabric to ensure that it is completely smooth. Do not use the
steam function.
• Iron the transfer paper, applying normal pressure. When moving the iron less pressure should be given.
Don't forget the corners and edges.
• Continue ironing until you have completely covered all sides of the image. This entire process should take about
60-70 seconds for an A4 size image.
• After few minutes remove the grease proof paper. To obtain a matt finish remove it while it is still hot, or for a glossy finish
remove it while it is totally cold.

Applications:

To transfer your favorite pictures or photos to dark colored material with a smooth surface,such as cotton,polyester,nylon,linen and so on
it is ok for personal t-shirt, hat, sportswear, sweater, gift bags, mouse pad ect.it can repair a damaged clothes or a dirty surface of clothes.

Storage:

please keep the heat transfer paper with relative humidity of 35-65%, temperature of 10-30°C

Washing:

Leave finish item for at least 24 hours before wash. Please wash inside out in cold water. Dry at normal heat settings. Don't use
bleach, fabric softener, or harsh detergent. Don't iron directly over transfer.

Kindly Note: Tranfer paper does not have gridlines

Kindly Note: For best results make sure your printer is set to the correct setting when sending it to print (for example make sure your printer can feed the thickness of the vinyl/paper), also make sure to use original ink cartridges. We advise you to test the surface heat transfer adhesion for your desired application before printing a full batch.