![TechniPrint - Printable Inkjet & Laser Heat Transfer Paper - Light Fabrics - 5pk - A4](http://scrap-a-doodles.com/cdn/shop/files/ironon-a4-light-fabrics_1_1_700x700.png?v=1719464374)
TechniPrint - Printable Inkjet & Laser Heat Transfer Paper - Light Fabrics - 5pk - A4
by Techniprint
SKU TPL-A4-5pk
Original price
R 155.00
-
Original price
R 155.00
Original price
R 155.00
R 155.00
-
R 155.00
Current price
R 155.00
Ships Within 1-3 Work Days
Printing Instructions:
1. Preparing Image
- Start with plain paper mode. If toner does not fuse completely or you get lines in your print, adjust your setting to a heavier paper mode like heavy or transparency.
- Mirror the image.This can usually be done within the printer’s property panel.
- Print the image on the blank side of the transfer paper. (Not the side with the text.)
- Paper should be fed into the printer short dimensions first. (grain long)
2. Cut-out Design
- For best results trim the image before applying to garment.
3. Preparing for Transfer:
Heat Press Application (REQUIRED)
- Prepare heat press at 375 degrees F.
- Place heat transfer paper with image facing down in desired position on fabric.
- Using above recommended temperature, apply firm pressure (60 PSI or greater) for 30 seconds.
4. Peel & Wear
Hot peel. Peel the transfer immediately after pressing. (Caution, transfer will be hot.)
- For best result leave on the heat press, wait 10 seconds and then peel the paper in a smooth even motion.
- To improve the feel, stretch garment in all directions while still hot.
- The image can also be softened by covering again with teflon sheet, repressing for 10-15 seconds and immediately stretching it whilst still hot. (Caution, transfer will be hot.)
Soft Fabric Preferred Method
- Pre-Press for 5-10 seconds
- Place the transfer face down covered by a teflon sheet
- Press for 10-15 seconds at 190 C
- Remove from press and peel the paper AFTER cooling (do not stretch)
- Place garment back on the press covered by a teflon sheet and press again for 25 seconds.
- Remove the teflon sheet and immediately stretch the garment in all directions to soften and improve the durability of the print.
- Washing Instructions:
- Wash inside-out in cold water using a mild detergent. Do NOT bleach. Dry on low-heat setting. Do NOT Iron print.