Genkem Polystyrene Foam Adhesive | Foam Safe Glue for Ceiling Tiles, Insulation & Decor 

Foam-Safe High-Tack Bonding Adhesive

KEY BENEFITS

• Designed for polystyrene foam bonding
• High initial tack
• Strong long-term bond
• Heat resistant
• Bonds foam to multiple surfaces
• Ready-to-use formula

WHERE TO USE

• Polystyrene sheets
• Ceiling tiles
• Insulation boards
• Decorative foam applications
• Wood surfaces
• Metal and fibreglass surfaces
• And many more applications

HOW TO USE

• Ensure surfaces are clean, dry and free from grease or dust
• Stir well before use
• Apply a thin coat to both surfaces
• Allow adhesive to dry for approximately 15 minutes
• Carefully position surfaces together
• Apply mild pressure to secure the bond

Critical: Do not overapply adhesive. When bonding polystyrene to itself, ensure the adhesive is fully dry before joining surfaces. Excess adhesive or bonding while wet may damage the foam. Do not use below 5°C.

Tip: Test on a small area first when working with lightweight decorative or low-density foam products.

WHY CHOOSE

• Designed specifically for foam applications
• Helps prevent foam damage
• Stronger than standard craft adhesives
• Suitable for insulation and decorative projects
• Easy brush or spray application

KEY SPECIFICATIONS

• Rubber-based adhesive
• SBR formulation
• High initial tack
• Approximate dry time: 15 minutes
• Full bond strength: 24 hours
• Shelf life: 12 months
• Brush or spray application

TRIED. TESTED. TRUSTED. SINCE 1939.

HIS501