Sculpey - Liquid Sculpey Bottle - Clear (59ml, 2oz)

Sculpey® Liquid Bakeable Clay - Clear

• New Clear is TRULY transparent
• Allows perfect visibility of additives such as glitter, dried flowers and leaves
• Can be used as a coating to achieve a resin-like finish within 20 minutes
• Works perfectly with Sculpey® Silicone Bakeable Moulds
• Can be colored with alcohol-based inks before or after baking
• Holds a crisp, clear line when used with image transfers
• Great for detailing miniature pieces and for “drawing” with clay
• Perfect for using with moulds and building by baking and re-baking layers*
• Note: Clear Liquid Bakeable Clay will yellow with repeated baking
• To thin: Add Sculpey® Clay Softener until desired consistency is reached
• To thicken – add mica powder and stir until desired consistency is reached. *Please note: Adding mica may cause the colour to change
• Image transfer: Spread a thin layer on the image.  Bake according to instructions.  Remove from oven and soak in water for 5 minutes.  Gently rub off paper with fingers
• Available in 2 fl oz (59mL)
  

Liquid Bakeable Mediums do not give off toxic chemicals during the curing process. However, you will experience a slight odour and smoking, which is non-hazardous. To minimise this, we suggest using an oven hood fan, and if you are using moulds, only bake one at a time. We always recommend using an oven thermometer. Many times, ovens are not calibrated accurately and are actually hotter than the temperature set on the dial. Just preheat your oven for 15-20 minutes, which should be long enough to reach the temperature on the oven thermometer needed to cure your project.