Skip to content
Free delivery in SA over R1000* We deliver globally. Local Shipping Cost from R89 - R139. Support Hours 9AM-5PM SAST
Free delivery in SA over R1000* We deliver globally. Local Shipping Cost from R89 - R139. Support Hours 9AM-5PM SAST
Sculpey - Transparent Liquid 2oz

Sculpey - Liquid Sculpey Bottle - Translucent (59ml, 2oz)

by Sculpey
SKU ALSB02
Sale Sale
R220.00
R220.00 - R220.00
R220.00
R190.00
R190.00 - R190.00
R190.00
Ships Out Within 24h-48h

Liquid Sculpey 59ml (2oz) Bottle - Translucent

Sculpey® Liquid Bakeable Clay - Translucent
  • Translucent is a whitish clear with translucent properties when baked.
  • Works perfectly with Sculpey® Silicone Bakeable Moulds
  • Can be colored with alcohol-based inks before or after baking
  • Holds a crisp, clear line when used with image transfers
  • Great for detailing miniature pieces and for “drawing” with clay
  • Perfect for using with moulds and building by baking and re-baking layers
  • To thin: Add Sculpey® Clay Softener until desired consistency is reached
  • To thicken – add mica powder and stir until desired consistency is reached. *Please note: adding mica may cause the colour to change
  • Image transfer: Spread thin layer on image.  Bake according to instructions.  Remove from oven and soak in water for 5 minutes.  Gently rub off paper with fingers
  • Available in 2 fl oz (59mL)
Picture

Picture

Picture

Liquid Bakeable Mediums do not give off toxic chemicals during the curing process. However, you will experience a slight odour and smoking, which is non-hazardous. To minimise this, we suggest using an oven hood fan, and if you are using moulds, only bake one at a time. We always recommend using an oven thermometer. Many times, ovens are not calibrated accurately and are actually hotter than the temperature set on the dial. Just preheat your oven for 15-20 minutes, which should be long enough to reach the temperature on the oven thermometer needed to cure your project.